Pre-Ride Inspection
Before every ride, perform a quick check of your motorcycle. A well-maintained motorcycle is safer and more reliable.
Brakes
- Check both front and rear brake levers for proper resistance
- Brakes should engage firmly without pulling to one side
- Check brake fluid level regularly
- Replace brake pads when worn
Tires
- Minimum tread depth: 1 mm
- Check tire pressure before riding — refer to the manufacturer's recommended pressure
- Inspect for cracks, bulges, or embedded objects
- Replace tires when tread is worn or damaged
- Under-inflated tires affect handling and increase fuel consumption
- Over-inflated tires reduce grip and traction
Lights
- Headlight: Check both high beam and low beam are working
- Tail light: Must be visible from the rear
- Brake light: Must illuminate when either brake is applied
- Turn signals: Check all four indicators are functioning
- Replace burnt-out bulbs immediately
Horn
- Must be in working condition at all times
- Used to alert other road users of your presence
- Test before every ride
Mirrors
- Both side mirrors must be fitted and properly adjusted
- Clean mirrors provide better rear visibility
- Replace cracked or broken mirrors
Chain
- Check chain tension — should have about 20-30mm of slack
- Lubricate the chain regularly
- A loose chain can come off; a tight chain can damage the sprocket
Engine Oil
- Check oil level using the dipstick or sight glass
- Change oil at intervals recommended by the manufacturer
- Low oil can cause engine overheating and damage
Coolant
- For liquid-cooled motorcycles, check coolant level regularly
- Never open the radiator cap when the engine is hot
Battery
- Check battery terminals are clean and tight
- Ensure the battery holds charge — a weak battery may fail to start the engine